I replaced my coil pack today because I think I have a coil going bad. The car ran this morning. I drove it into town. I put on a new coil pack and module and it would start. Then I put on another known good coil pack and module. It still wouldn't start. I know I have fuel pressure. I didn't touch anything other than the coil/Module.
does anyone have the wiring diagram for the connector that plugs into the base module. I need to test some of the pink and black wires to see if they are hot. The plug itself looks fine. This crap is frustrating.![Confused :confused: :confused:](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f615.png)
does anyone have the wiring diagram for the connector that plugs into the base module. I need to test some of the pink and black wires to see if they are hot. The plug itself looks fine. This crap is frustrating.
![Confused :confused: :confused:](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f615.png)