Cold Air kit for TTA?

[BradWE4]

Does anyone sell one or have pictures of their own home made kit?

 

[The Swede]

Nothing special with it...one good foam filter and a wall of isolation material that seals around the bended plastic piece and to the underside of the hood.....

Hope this link works......
http://se.msnusers.com/TurboUffe/shoebox.msnw?Page=Last

I know that some one cutted a hole in the plate that goes besides the radiator and had the filter in the nose cone.....

 

[Razor]

I did mine a little different,I used a 3 inch exhuast turndown going through the metal and placing the filter under the car.

I did this to be able and fit the SMC alky kit and relocated the charcoal cannister in the process.The black plate that holds the cannister was removed as well as a triangle brace under the front fender to let the airfilter fit.No MAF reading probs whatsoever.And IAT are 1-2 degrees above outside air temps.

Just another way to skin a cat

Here's the link

http://photos.yahoo.com/bc/idoxlr8_70/lst?.dir=/Ram+Air+Pixs&.view=t