***cold air kit parts, PTE ts parts***

[Turbo Indian]

Pete Tomka 4" adapter-----------------------------------------$15.oo shipped to lower 48
29.5" Pete Tomka 4" hose (this is the good smooth inside hose)--$25.oo shipped lower 48 only


PTE turbo saver head & hoses only-----------------------------$20.oo shipped to lower 48 only
to complete the turbo save you will need filter adapter like this one. http://store.summitracing.com/partd...&N=700+4294851620+4294903588+115&autoview=sku

 

[mhogan6]

Turbo saver head

PTE TurboSaver head/hoses. $20 shipped.
I'll take it. P/M with payment info. USPS money order OK?

Mike H.

 

[johnplogii]

Interested in the cold air kit, any more info on it? What else is needed to complete it? Does it take some special clamp? Where does that adapter go?

Thanks

John

 

[Turbo Indian]

Interested in the cold air kit, any more info on it? What else is needed to complete it? Does it take some special clamp? Where does that adapter go?

Thanks

John

the coupling will connect the 4" hose to a 4" K&N filter together. it uses just 4" hose clamps. "if" you have a 4" inlet on the turbo, you just connect the hose to the turbo, then the coupling, then to a 4" k&n.

PTE Turbo Saver head/hoses. $20 shipped.
I'll take it. P/M with payment info. USPS money order OK?

Mike H.

pm sent.

 

[QTRMILER]

is the 4" set up still available??

 

[Turbo Indian]

is the 4" set up still available??

sorry for the delay getting back.these 2 pieces are still available.

Pete Tomka 4" adapter-----------------------------------------$15.oo shipped to lower 48
29.5" Pete Tomka 4" hose (this is the good smooth inside hose)--$25.oo shipped lower 48 only

 

[johnplogii]

Steve, do you happen to have anything else for this setup (clamps, filter or the peice that keeps it away from the alternator)? I need to get a 4" setup but would just assume get everything together.

Thanks

John

 

[johnplogii]

Steve, do you happen to have anything else for this setup (clamps, filter or the peice that keeps it away from the alternator)? I need to get a 4" setup but would just assume get everything together.

Thanks

John

???

 

[Turbo Indian]

???

very sorry John, for some reason I did not get a notification that you replied. I will check in the am to see if I still have the bracket I made to keep it away from the belt.

 

[johnplogii]

Thanks Steve

John

 

[Turbo Indian]

John here is what I have...
29.5'' of the good hose
3 clamps
4" adapter
hose holder

all for $40.oo shipped

 

[johnplogii]

Sounds good Steve, I will take it. PM sent

John