Comp 980-12 Valve Springs

Sep 27, 2010
Im installing new valve springs tomorrow.

Im wondering what the correct spec would be for reinstalling the rocker arm's?

I have a Stock engine,is there anything else that should be done while replacing the springs?

Thanks for your thoughts in advance

Ran 980's for years with flat tappet cams. Never broke one even at 6000. RJC shaft braces are a must and even better is a new kit from Sealed Power with new shafts, rockers, retainers with shaft braces. Setup the springs at 92 lbs and never wipe cam if broken in right.

Simply put,if your still running with stock valve springs do yourself a favor and install the Comp 980-12 springs......

There is a Difference no Doubt!