Cottons Performance line lock

[ibmgto]

Does anyone have any pictures of where they mounted the Cottons Performance line lock with the pre bent brake line.

I tried to fit it with the line in a couple of different orientations and cant figure out where to mount it and still get the existing line to reach.

Thanks

 

[jays87gn]

Here ya go

 

[imjoesnuffy]

You can easily bend the stock lines to get them to line up. I bought the same kit and was wondering the same thing. Looked at it and scratched my head for a good hour or so. I called them and talked to Jack. He said just bend the stock factory lines by hand until it connects to the end of the line lock solenoid. I was a bit skeptical that it could or should be done by hand at first but I love the line lock. I attached mine on the bracket for the power steering reservoir.

I am not at home but hopefully someone can post a pic for you. Dont be afraid of the search function either .

http://www.turbobuick.com/forums/br...heels/248280-line-lock-install-questions.html

http://www.turbobuick.com/forums/brakes-suspensions-tires-wheels/241264-line-lock-questions.html

http://www.turbobuick.com/forums/brakes-suspensions-tires-wheels/231027-line-lock-installed.html

http://www.turbobuick.com/forums/general-turbo-buick-tech/183749-help-line-lock-install.html

Doh! Jay beat me to it.

 

[ibmgto]

Oh yeah, it makes perfect sense now.

Thanks for the responses and I did use the search but I just didn't come up with the right threads.

THANKS!!

 

[TurboDave]

Mine's a Biondo unit which is pretty much the same thing, but here's where mine's mounted.

click to enlarge:

 

[BADDGUY6]

Mine's a Biondo unit which is pretty much the same thing, but here's where mine's mounted.

click to enlarge:

Looks like your brake fluid inlet into the solenoid (See wire on solenoid)& Jays87gn inlet are opposite? Does it matter which end the BF goes in/out?

 

[jays87gn]

Not sure about turbodaves but it looks like his setup backwards according to the instructions http://static.summitracing.com/global/images/instructions/sbr-ll.pdf on my line lock it says brake on the copper side im pretty sure its the same line lock