CRUZ Performance new custom made products

[III'S 87 GN]

CRUZ Performance new custom made products


TR6 hard anodized mounting bracket
Will work with stock or Champion Intake


1 inch plenum spacer that has been tapped at the front for inlet temp sensor and 2 vacuum ports


Throttle body block off plate


Thermostat housing hard anodized to protect against corrosion


EGR block off plates

Please call,text or email for more info

813-399-0409
don@cruzperformance.com
www.cruzperformance.com

1. 
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   

 

[TURBOTERRORV6]

killer parts! would that 1" spacer work for a BGC intake ? thanks

 

[III'S 87 GN]

killer parts! would that 1" spacer work for a BGC intake ? thanks

No
But that's part of the next batch of custom new products coming

Thank you
Don

1. 

 

[turboc87gn]

When you use the spacer where do you put the power plate on the top or on the bottom? And do you have fuel rails that will work with the stock style/accufab fuel pressure regulator?

 

[Domenic Friguglietti]

pm sent

 

[GBGN1]

great idea on the module/coil plate.

 

[III'S 87 GN]

When you use the spacer where do you put the power plate on the top or on the bottom? And do you have fuel rails that will work with the stock style/accufab fuel pressure regulator?

bottom of it

stock rails are in production now

will post as soon as ready to ship

thank you

 

[2toneNV]

I'm really wanting to relocate my vacuum lines and get a TB block off plate, BUT don't really have a good idea on where or how to move the lines. Any ideas? Don't really want to tap the intake since it is a Champion and has been freshly powdercoated.
I am eagerly waiting on your stock style fuel rail!

 

[turboc87gn]

bottom of it

stock rails are in production now

will post as soon as ready to ship

thank you


View attachment 276960

Awesome ill be in for a polished or brushed set when you get them done

 

[III'S 87 GN]

I'm really wanting to relocate my vacuum lines and get a TB block off plate, BUT don't really have a good idea on where or how to move the lines. Any ideas? Don't really want to tap the intake since it is a Champion and has been freshly powdercoated.
I am eagerly waiting on your stock style fuel rail!

Start with this

Call or text me and I can provide what you will need

813-399-0409

 

[Gene Van Horn]

Beautiful parts

 

[2toneNV]

View attachment 276964


View attachment 276963

Start with this

Call or text me and I can provide what you will need

813-399-0409


View attachment 276964

Cruz, I have a Precision plenum and the billet vacuum block I am running already hits the hood pad. The spacer wouldn't fit on my set-up.

 

[GNBRETT]

sweet Don

 

[joeynj]

I send you a check tomorrow

 

[precizion818]

Any chance of you making a CnP bracket for the TB?

With mounting bracket you currently have for TR6, will the coil mount directly to the plate?


Sent from my iPhone using Tapatalk

 

[III'S 87 GN]

Cruz, I have a Precision plenum and the billet vacuum block I am running already hits the hood pad. The spacer wouldn't fit on my set-up.

it will fit if you remove your block put my block off plate on TB and then use my spacer for vacuum source

call, text or email for more info
Don
813-399-0409
don@cruzperformance.com
www.cruzperformance.com

 

[III'S 87 GN]

Any chance of you making a CnP bracket for the TB?

With mounting bracket you currently have for TR6, will the coil mount directly to the plate?


Sent from my iPhone using Tapatalk

not yet for CnP

yes the TR6 bracket is tapped to mount coil only or module and coil together

call,text or email
Don
813-399-0409
don@cruzperformance.com
www.cruzperformance.com

 

[turbotrix2004]

Any way of getting more ports on the spacer?

 

[III'S 87 GN]

Any way of getting more ports on the spacer?

yes
or you could just run the 1/4 port to a vacuum block and run everything to the block

call , text or email for more info
Don
813-399-0409
don@cruzperformance.com
www.cruzperformance.com

 

[III'S 87 GN]

A few parts being shipped out

Thank you for the business

CRUZ Performance new custom made products


TR6 hard anodized mounting bracket
Will work with stock or Champion Intake


1 inch plenum spacer that has been tapped at the front for inlet temp sensor and 2 vacuum ports


Throttle body block off plate


Thermostat housing hard anodized to protect against corrosion


EGR block off plates

Please call,text or email for more info

813-399-0409
don@cruzperformance.com
www.cruzperformance.com

1.