Dakota digital dash install question?

[Aus4955]

Hi everyone looking for some help here. I bought my gn with Dakota Digital dash rtx which i love but i was going over wiring cleaning some things up and noticed when i put my new tt chip in my CEL did not come on. Looks like it was never wired up with new dash .Looking for the correct wire to tap into to get it working on dash.

 

[ForeverLove]

Are you sure you checked everything thoroughly? Have you checked the condition of your fuses and are you sure that the wiring has not been damaged and that the current is at the same voltage everywhere? Are you able to check it yourself or make such a diagnosis?

 

[Chuck Leeper]

Are you sure you checked everything thoroughly? Have you checked the condition of your fuses and are you sure that the wiring has not been damaged and that the current is at the same voltage everywhere? Are you able to check it yourself or make such a diagnosis?

Huh??

 

[Aus4955]

Are you sure you checked everything thoroughly? Have you checked the condition of your fuses and are you sure that the wiring has not been damaged and that the current is at the same voltage everywhere? Are you able to check it yourself or make such a diagnosi

Huh??

Im lost on that one?

 

[Aus4955]

I could be wrong but i was looking at diagram say a5 pin brown/ white wire is service engine soon

 

[Chuck Leeper]

Im lost on that one?

We watch such activity, as there are way too many scammers, bots, trolls, infesting the various car forums.