Nope.
1.)Take door panels off(don’t think just the top will work)
2.) Slide door lock clip off, they can be a pain at times.
3.) Take lock cylinders out, requires a small bit of twisting.
4.) Make sure old gasket is off.
5.) Put new gasket on new cylinder, install onto lock rod. Make sure key works & cylinder is working smoothly.
6.) Install new clip/old clip(tab facing towards interior).
7.) Lube up linkages since youse in there.
8.) Replace door panels.
Takes maybe a half hour a door.
Note: Have new door clips as well if needed. Also unless you get a new key cut, your new door lock keys will not match the trunk & glovebox.