Downpipes, ATR roller cam, intake, misc items

[chris]

ATR roller cam setup - $400 SOLD
Lower intake ported to flepro 1200, egr removed, mounting holes oblonged to fit on-center, but will line up for production - $100
Stock intake manifold complete - $250 SOLD
BGC 3" downpipe and cast elbow, series 1 steel - $175 will fit under stock turbo shield
BGC 3 downpipe and cast elbow, series 2 stainless steel - $285 SOLD elbows will fit under stock turbo shield
3" stainless downpipe, manufacture unknown, will fit stock headers and ATR headers. KevinB used this pipe into the 9's - $250 SOLD
Hooker downpipe for external wastegate - $100
3" downpipe for external wastegate, pipe built to 3" elbow (pipe is rough) - $125 SOLD
stock elbows - $25 each
stock ported elbow, good if you have a 3" pipe for stock - $50
turbo j bracket, turbo sheild mounting holes removed - $35
stock up-pipe with alky injector nozzle - $40
MAF aluminum pipe, chrome plating chipping needs painted - $15
exhaust manifold set, drivers side needs welded - $85
exhaust manifold set with crossover, drivers side needs welded - $115
turbo shield uncut - $35 SOLD
ATR air intake and filter with charcoal canister relocation bracket - $95 sold
powerstroke intercooler, aluminum tanks - $100 SOLD
power steering box, 85,000 mi - $85
1.5" 2" drop spindles with dust shields, rotors (turned ready to go), and calipers - $175
manual seat track - $65
NOS MAF - $250 SOLD
NOS intercooler fan - $100 SOLD
NOS rear emergency brake cables - $100
chrome turbo shield - $75 SOLD
new power plate for stock plenum - $40 SOLD
Buyer pays shipping

 

[oldsracer]

How much for Trans dipstick without a tube

 

[SCOOBY DOO]

Is the cam set up for stock rockers or adjustable rockers? How many miles on this set up?

 

[TType85]

interested in the BGC elbow/ stainless dp. Any pics of it?

 

[kidglok]

i have never seen 1.5" drop spindles for a gbody, if we can verify that they are in fact 1.5 and not 2.0-2.5 i will take them.

 

[TType85]

I'll take the stainless bgc pending pics.

 

[chris]

BGC stainless downpipe

 

[chris]

Is the cam set up for stock rockers or adjustable rockers? How many miles on this set up?

This was originally for stock rockers, but can be used with adjustable. Mileage is unknown, I've had this about 10 years and have not used it. Also included are valve springs for a stock rocker arm setup.

 

[alec296]

do you know anything else about cam,mild or race
i cant find these specs in atr catalog from 2003

 

[chris]

Cam is a little bit more than stock.

 

[4CE FED]

3" stainless downpipe, manufacture unknown, will fit stock headers and ATR headers. KevinB used this pipe into the 9's

Can you give me some more info and photo of this? Is it for internal gate?

 

[chris]

do you know anything else about cam,mild or race
i cant find these specs in atr catalog from 2003

Cam is a little bit more than stock.

 

[TType85]

Paypal will be on the way later this morning for the BGC stainless DP/elbow

 

[chris]

Couple of new items added.

 

[1BUICKT]

How much for the turbo shield?

*edit.. Saw it listed above* oops

 

[chris]

Updated pricing.

 

[phil_jordan]

(probably dumb question)- that intercooler isn't for our cars is it?

 

[turbo96max]

location?

 

[chris]

(probably dumb question)- that intercooler isn't for our cars is it?

Ford power stroke.

 

[phil_jordan]

Thats what i figured. I seen "powerstroke" and had to ask. Figured someone fabbed one up to fit. Lol. Thanks