You can type here any text you want

Edash into Casper Harness???

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

696

Active Member
Joined
Jun 11, 2009
Messages
853
I'm installing the Edash into the Casper extension harness by the supplied instructions. The C30 & D5 ports are already being "used"? Are you supposed to unpin them and plug in the edash or will this damage the XFI? I did a quick check but the only thing I saw was the edash and scanmaster 3 combo. Just want to be sure before I mess anything up.
 
C30 can be removed. It's connected to the ALDL data line which isn't used. D5 is a ground and is probably used for something. You can either find an unused ground in the connector or splice into the ground for the regular RS-232 connection at C29.
 
Back
Top