egr block off plate

[79Poncho231]

Are there any companies that make them (EGR delete plates) for the Carbed 4.1 intakes? I do not know if they are special to these or a Universal fit.

Thanks.

 

[WE2Regal]

Used to be able to get nice billet block off plates on Ebay but I don't see them listed anymore. They are the same as on 80's 350 and 305 TBI engines, '93-'97 Camaro Z28's and many others cars such as Hondas. Acura, etc. You'll have to look around for a reputable seller. You may need different bolts than what would come with the plate.

 

[WE2Regal]

Not as fancy looking but these work just fine. I've personally dealt with this company and they are reputable and great to deal with. I have one of these sitting around also. TTA Performance

 

[79Poncho231]

Not as fancy looking but these work just fine. I've personally dealt with this company and they are reputable and great to deal with. I have one of these sitting around also. TTA Performance

That works on a 4.1 intake? Plain jane works for me.

 

[79Poncho231]

Used to be able to get nice billet block off plates on Ebay but I don't see them listed anymore. They are the same as on 80's 350 and 305 TBI engines, '93-'97 Camaro Z28's and many others cars such as Hondas. Acura, etc. You'll have to look around for a reputable seller. You may need different bolts than what would come with the plate.

Right'on. the ones i did see where $70+ which is insane IMO for a plate.

 

[Turbo6inKY]

An afternoon with a set of calipers and a few tutorials on FreeCAD and you can send a file to SendCutSend to make as many plates as you want for pennies.

 

[chris romani]

There is 3 on EBay from various vendors for $25 bucks.

 

[WE2Regal]

That works on a 4.1 intake? Plain jane works for me.

Yes, they work on a 4.1 intake and several of the aftermarket intakes with EGR also. Considering the EGR is on the back of the intake, you'll never see it anyway.

 

[79Poncho231]

update. Finally, it's now time to order one.I will update with a picture when done.