You can type here any text you want

ET streets

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

mojilla

Member
Joined
Aug 2, 2001
Messages
194
I am looking at getting some et streets for the stock rims. I know 11.5 et street will work on the stock rim. Will a 28x12.5 et street fit on the stock rim. The tread with is 10 inches.
THANKS
 
would be very tough the 11.5(305-315) strain the sidewall alot as it is. You could get the rims widened to 9" that'd help.
 
Are you talking about 15" tires?



just switched to the 28/10/16 hoosier,lil' bit of rubbing with em'
 
I am planing on going with 16 inch stock rims. Do you have 10 inch slicks or et streets, because the 11.5 et streets tread is 10 inches wide, and the 12.5 et is 11 inchs of tread.
THANKS
 
this is what i have
(JEGS numbers)

Hoosier

522-18153C07 Size: 28x10.0-16
Rim: 8-10''
Tread: 10.0''
Section 12.0''
Diameter: 28.0'' $179.99

which Ones are you talking about?the 28's at the bottom?I ran the 26X11.5X16 before

Mickey Thompson

672-3792 Size: 26 x 10.5-16
Rim: 8.5''
Tread: 8.4''
Section 10.3''
Diameter: 25.9'' $166.99

672-3793 Size: 26 x 11.5-16
Rim: 9''
Tread: 9.7''
Section 10.8''
Diameter: 26.2'' $173.99

672-3794 Size: 27 x 10.5-16LT
Rim: 8''
Tread: 8.9''
Section: 10.6''
Diameter: 27'' $169.99

672-3796 Size: 28 x 11.5-16LT
Rim: 8''
Tread: 8.7''
Section: 10.7''
Diameter: 28'' $166.99

672-3797 Size: 28 x 12.5-16LT
Rim: 10''
Tread: 10''
Section: 12.1''
Diameter: 28'' $176.99
 
Yes, I am talking about the 28x12.5x16 et street. Would that fit on the stock rim? would it fit on the car?
THANKS
 
I wasn't aware they made them.

they are very close to what I have in the section width 12.0 an 12.1.I would go with the Mickeys for sure,I got mine buy 1 get 1 free,and they weren't making Mickey T's in 16" at the time.

If you look in front of the axle on the wheel well,the closest part
to the tire,that's where mine are rubbing,but only when the suspension is compressed one way or the other,they are just barely making contact,but I want to make sure they clear in case it hits on launch.There is a ton of room all the way around except there.

I am going to take a look at it this week and see what can be done.I'll post and let you know what I come up with L8R:D
 
Doesn't look like much,I'm gonna give em a few whacks ,barely hitting in two spots.nuthin a piece of wood and a hammer can't fix
 
badazz ta, I was just wondering if you got the 12.5x28x16 et streets to fit? I called mickey thompson and they said, "that the biggest tire I can go with would be a 10.5x28x16 et street."
If the tires did fit what did you have to do to make them work?
THANKS
 
i have the hoosiers,they have been on 4 about 100 miles,i had just heard them every now and then rubbing.they are fine now.I'd run em'. :cool:
 
bad azz tta, what size hoosiers are they? Are they the quick time pros or are they full slicks?
THANKS
Joe
 
Back
Top