External wastegate setup?

[simon930]

I want to change from internal wastegate setup to an external wastegate setup.
I want to know what wastegate and what down pipe I should get because I have no experience in this?

This is a list of what I got in the car:

TRW .030 pistons
Poston 107T cam
Turbonetics cheetah 60
50lbhr injectorsa
Turbotweak chip
hotwire kit
340 pump
Alkycontrol progressive system,


Thanks let me know

 

[RegalT-type85]

You can get a External wastegate welded on your DP. Any Dp with Stock style swing valve can be welding closed, so it wont open under boost. Then You just Weld in your choice of wastegate to Up pipe and dump it out or run it to the DP. You can buy a DP with no swing valve if you prefer but hope this helps.


http://www.turboneticsinc.com/gn_turbochargers Do you have this turbo housing? if so you can just Intall your wastegate of choice on the housing itself, and get your SV welded closed.

 

[TurboTnZ06]

The best is to put the waste gate off the header before it gets to the turbo. BWR can do that.

 

[RegalT-type85]

Opps I was thinking of HA motor, Yes header "up" pipe is best place to put a wastegate but mine the angle/location.