Finding parts

[twin2turbo87]

i need an up pipe gasket for the inlet on the hot side of the turbo. can't find one anywhere. I'm using header collector gaskets now. I also need tranny cooler lines. Google hasn't done me much good. I went to Autozone today and asked while i was there for the hell of it. The kid behind the counter asked me who made a regal. lol

 

[twin2turbo87]

found the tranny lines. stumbled onto them trying to find an ac condensor. go figure.

 

[Anthony P]

after some quick searching...

it looks like many folks are using a felpro 60537. it's a graphite seal and sleeve like one used between the factory turbo elbow and the downpipe.

the original triangle shaped, pot metal seal, 3 holes, about a 1/4 in thick has been discontinued for like 2 decades. it was GM 25513239 for reference.

found it on rock auto for $6.14. with shipping is less than $10 to your door.

http://www.rockauto.com/en/parts/fel-pro,60537,pipe+flange+gasket+/+seal,5836