FPR Vacuum fitting ??

[Tow Man]

Just a quick question!

I noticed a 1/16" crack in the 90 degree vacuum elbow that goes on the FPR.

Question is, where can I find this piece? If available from GM, can anyone give me the part #?

Thanks as always!

 

[Chris Taylor]

I don't have the GM part number. A quick fix is to ues a piece of soft vacuum line from the FPR to the hard line. Just make sure it does not bend.

 

[kenmosher]

You can find replacements in the HELP section of the chain auto stores.

 

[MSDGN]

Check out the Vacu-Tite section in any auto parts...usually near the packaged bolts/nuts...they have all different types/sizes of vacuum line connectors...the one I use for the FPR is an elbow Vacu-Tite part#47411 but I have an Accufab...might need a different one for stock FPR...

 

[Tow Man]

Thanks! Going to the store now. I also have the Accufab regulator.