FPS-G7RXP255 - hanger assy - tabbed o-ring?!?

[vacuum 6]

Does anyone have install pics for the tabbed o-ring?

 

[earlbrown]

i don't understand... it just drops in place, the the hanger drops on top of it.

 

[vacuum 6]

Exactly. What are the tabs molded into the oring for?!?

 

[TRICKSIXPA]

Maybe you can see in this picture the O ring goes around the lock ring and you slide the ring on. Only goes on one way! Then you take screw driver and hammer and tap it until it gets to the ring stop.


Sent from my iPhone using Tapatalk

 

[haywire4130]

I just installed the racetronix hanger/walbro 450 pump assy, i discarded the tabbed oring and reused the regular one that i had on before. I tried the tab one but the sender was still pretty loose with it in there and most likely would have leaked. I'm running a spectra replacement tank, your results may vary

 

[vacuum 6]

OK good to know. Using same tank here. Thanks.

 

[vacuum 6]

Wow the oring that comes with the kit is junk!!!!! I could fully install the ring with my hand [emoji50]

 

[earlbrown]

That makes more sense then. I ran my original O-ring until I replaced my tank a few months ago. then I used the one that came with the tank.

 

[vacuum 6]

I used the original too. The kit AND the new tank one are junk!!!