Fuel Fitting

[jason87]

Not sure why u r making a big deal out of this. The exact info I was looking for has been answered with ur fitting sizes. Thanks

 

[kidglok]

I am looking for a inline fuel fitting like what came with the kenne bell fuel guage kit. It goes between the inlet fuel line and the fuel rail and has an extra 1/8 npt port. Please let me know how much to 17225. Thanks
1RIPPEN6, Jan 26, 2010 Report#1LikeReply

Usually fuel pressure is measured at the return side after the regulator, not the feed line.

 

[jason87]

I know that. All I seem was his post asking for a fitting to go in the inlet side of the fuel rail could careless about the pressure port but if it would have worked I would have just plugged it off.

 

[jason87]

No, what I am looking for goes in the inlet side of the fuel rail. You remove the supply fuel line from the rail screw the fitting into the rail and then screw the line back into the fitting.

Thanks
1RIPPEN6, Jan 26, 2010 Report#4LikeReply

 

[jason87]

U r the kind of person who loves to point out pointless information. I thought I had to do with the same thing according to his post so I replied. Cause I'm having a hard time finding the fitting sizes. Not trying to be a smart ass just saying