Fuel Pressure Settings

[DaJoker]

I know this is a dumb question that has probably been asked many times before but I've been searching to no avail. I'm gettin ready to put my AFPR on my car and what pressure should it be set at. My car has the stock turbo, intercooler etc, has 100#springs, TurboTweak Street Chip, CAI, and RJC Plate. I am going to get an in-line gauge and tape it to the windshield, just wanna know where to start. Thanks Kris.

 

[Quiky One]

Straight from TurboTweak Home

I calibrate the chips at 43psi fuel pressure, but feel free to adjust it for your car if necessary. (Except Siemens 83's, start those at 46psi.) If you have to go further than +/- 5psi from 43, then there may be something else wrong.

Jason

 

[DaJoker]

Thanks the one place I didn't think about checking.