Fuel Return line

[Toby_Goodmk]

I am looking for a piece of fuel return line, steel. This is a part of the line that has the O ring type ending (saginaw type) It is 7/16"-24 thread. It comes out of the frame and connects to the line which has the rubber hose, and the female connection that attaches to the block. Basically I need a length to be able to fix them back together. Ill be dipped if I can find a way to adapt it.

 

[pacecarta]

the return is actually on top of the frame , runs under pan to passenger side
its 1/4 tubing and operates at low pressure , you could re join with rubber fuel injection hose and clamps ( same as it is above the axle) , or use a 1/4" compression union, or flare both ends and use a flare coupling

 

[Toby_Goodmk]

That is the way I had it with this short piece flared out a bit but is too short. Hell all I need is the right bumped end and a piece about 2" and I'd be golden

 

[Toby_Goodmk]

That male end goes into this line

 

[broke86gn]

Pm sent..

 

[RUDE DOG]

If you still need the line end let me know.

 

[Toby_Goodmk]

Thanks for the offer Rudy I got one and its installed