Testing the waters to see if there would be any and/or how much interest in this type of gauge setup. Any type or brand of gauges could be used as long as they are 2 1/8" for the small ones and 3 3/8" for the speedo and tach. This is a prototype fabricated by myself as an alternative to what is out there at this time. This is not exactly plug and play but then it's not brain surgery either as long as you have basic electrical knowledge and skills. While this does require trimming of the stock core support it is NOT to the point it's completely hacked up and couldn't be returned to stock if desired. Don't pay attention to the trim bezel as it is a used piece with no overlays installed at time of photo.