Did the diagnostics with ohm meter everything looked good and the switch is grey.Could not tell if the accumulator is bad or if it is the motor don't have the tool.
Lol. In post #1 & #8 you say motor is not running. In post #3 you say it does run. Which is it?
If your motor is completely dead and the fuse hasn't blown then its either your brake switch and/or motor is fried. Check to see if switch terminals have continuity with each other. If it doesn't, switch is dead. If switch checks out ok move to motor and follow diagnostic steps #3 in the following link: http://www.gnttype.org/techarea/brakes/PwrMstr.html