Help ID this turbo, specs. inside:

[NCTURBOS]

I'm thinking it's a Te44...

Comp. wheel:
2.995"/76.07mm at the blades base
2.310"/58.67mm at the blade tips

Exh. wheel:
2.530"/64.27mm at the blades base
2.185"/55.50mm at the blade tips


TIA,

K.

 

[RUQWKNF]

The TE44 that we sell measures out like this:

Comp wheel:
2.290" Inducer
2.950" Exducer

Turbine wheel:
2.559" Inducer
2.228" Exducer

And just to throw this out there, our TE60 measures out like this:

Comp wheel:
2.320" Inducer
2.950" Exducer

Turbine wheel:
2.559" Inducer
2.228" Exducer


Now, way back when, we used to offer what was called a 6027 turbo.
It used the same compressor wheel, but used the T27 Stage 2 turbine wheel.

That turbine wheel measured:
2.559" Inducer
2.121" Exducer

So, if I had to guess, I would probably say it is a 6027 turbo as the turbine wheel measures closer to what you found. It was rated at 580 fwhp and was slightly quicker spooling than a standard TE60 turbo.
These measurements were taken at these points on this picture.

Hope some of this helps.

Patrick

 

[NCTURBOS]

Thanks Patrick... I'll measure a little more precisely this weekend, using your chart and #'s as a guide.


Thanks,

K.