Help Please!! 60lb upgraded injectors???

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

laws69cars

Active Member
Joined
Apr 8, 2011
Messages
255
I have a stock 87 GN and purchased a set of what I thought was 32lb injectors from a member here but come to realize after installing they are 60lb injectors.. Just want to know if anyone can tell me what I would have 2 do to or upgrade to my car to make the 60lb injectors work? I do eventually want to beef up my motor so wouldn't mind keeping the 60lb injectors if I could make my car run properly right now with them already installed? ? Any help or advice would be greatly appreciated .. Thank You
 
Just call up TurboTweak or FullThrottle tech and have a chip burned for your new injectors.

You'll also want to upgrade the fuel pump.
 
Get a turbo tweak chip from Eric Marshall. You also need to know the other mods the cars has done to the motor and trans. Also get the numbers off the side of the injectors to see what brand they are and if they are in fact 60's. that's it


Posted from the TurboBuick.Com mobile app
 
Thank you all for your help and im sorry if im asking dumb questions just new to the GN that i purchased about 5 months ago from a friend. was stuck on the old 350 monte carlos till I could finally save up and get a real car.. lol. So ok got the part down about upgrading the chip and I did see the brand and number on the injectors and the are the mototron 006 which I did see as 60lb??? So now we are talking about upgrading a fuel pump and what else if anything? ? Also any ideas as to which kind or type of fuel pump or pressure or whatever else it is I may need 2 be looking for? As far as I know the engine/ turbo is all stock and so is the tranny with the exception of a shift kit that my friend installed? ? The only work I've done so far all because I got the wrong injectors was change the coil module, coil pack, spark plugs and wires to all stock all new thinking that was my problem come 2 find out they sold 60lb injectors when I was looking for the 32lb... lol
 
Thank you all for your help and im sorry if im asking dumb questions just new to the GN that i purchased about 5 months ago from a friend. was stuck on the old 350 monte carlos till I could finally save up and get a real car.. lol. So ok got the part down about upgrading the chip and I did see the brand and number on the injectors and the are the mototron 006 which I did see as 60lb??? So now we are talking about upgrading a fuel pump and what else if anything? ? Also any ideas as to which kind or type of fuel pump or pressure or whatever else it is I may need 2 be looking for? As far as I know the engine/ turbo is all stock and so is the tranny with the exception of a shift kit that my friend installed? ? The only work I've done so far all because I got the wrong injectors was change the coil module, coil pack, spark plugs and wires to all stock all new thinking that was my problem come 2 find out they sold 60lb injectors when I was looking for the 32lb... lol
 
Just get a basic upgraded pump from turbo tweak as well. I believe it's $115, or the Walbro 340, it flows less than 300, I'm not positive that is the model name and number but get the one for $115. You can get both pump chip and a Hotwire kit for the pump all at the same site.


Posted from the TurboBuick.Com mobile app
 
With the new chip you'll probably want an adjustable fuel pressure regulator and a gauge so you can set fuel pressure to 43psi with the vacuum line off.
 
Back
Top