Hot Air Conv.

[carolinaturbo]

Hey guys changing out to IC and are the intake gaskets the same and what kind should i run? Thanks for any help.

 

[luisturbog]

Fel pro #1200

 

[luisturbog]

They are the same.

 

[dr_frankenstein]

I would use the stock tray gasket.

not a 1200... the ports are huge in a 1200.

 

[luisturbog]

I would use the stock tray gasket.

not a 1200... the ports are huge in a 1200.

The gains of port matching are good.

 

[carolinaturbo]

So should i port match to stock tray or 1200s?

 

[dr_frankenstein]

So should i port match to stock tray or 1200s?

which ever you feel up to the work for, one will take more then the other. both sets are not too expensive, buy both and compare for yourself.

but if your not planning on doing it, use the stock tray. using that huge 1200 on an untouched port will cause little pockets of turbulence where the gap is, as that hurts flow.

 

[carolinaturbo]

Think i will stay stock. Just want some 11s.