Hot wire kit.

[kilhef]

Installed new fuel pump and now ready to inslall hot wire kit. What is the easiest and best way to run the harness.

 

[GNONYX]

If you see the engine compartment picture; follow the black cable with the white tag and it's tie-wrap towards and underneath the PowerMaster down by the brake proportioning valve. The next picture shows the cable tie-wrap inside the channel exiting out towards the gas tank. You DO NOT need to cut the cable; you might need a coat hanger wire to pull the cable.

 

[kilhef]

If you see the engine compartment picture; follow the black cable with the white tag and it's tie-wrap towards and underneath the PowerMaster down by the brake proportioning valve. The next picture shows the cable tie-wrap inside the channel exiting out towards the gas tank. You DO NOT need to cut the cable; you might need a coat hanger wire to pull the cable.

Thanks you very much!!