***How Much PSI for Alky***
- Thread starter Granny 2
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
Well... actually the 60 PSI Shureflo is all we use. we just crank down on the pressure screw on top of the pump and make them 100 PSI shureflows..
Lots of cars run with the 60 PSI setting and are happy. it all depends on your performance level expectations. And the sizing of nozzles. See 100 PSI and a big jet will drown the motor. Consequently at 60 PSI and the same jet may do the trick just fine.
Yes bigger pressure is great given the correct nozzles.. what size for you car.. this will require some trial and error.
Convenience and features dictate $$$. Alcohol injection can be simple to complex. If I had a really modded car, I wouldnt go the simple route. On a stock car with mild needs..sure.
Remember, this detonation control device can be turned into a save your motor device given the rite design
Lots of cars run with the 60 PSI setting and are happy. it all depends on your performance level expectations. And the sizing of nozzles. See 100 PSI and a big jet will drown the motor. Consequently at 60 PSI and the same jet may do the trick just fine.
Yes bigger pressure is great given the correct nozzles.. what size for you car.. this will require some trial and error.
Convenience and features dictate $$$. Alcohol injection can be simple to complex. If I had a really modded car, I wouldnt go the simple route. On a stock car with mild needs..sure.
Remember, this detonation control device can be turned into a save your motor device given the rite design
