Hp.109 billet parts

[turbot990]

Putting out a feeler GN1-R ALUM HEADS WITH ROCKERS SET UP FOR SOLID LIFT TD ROLLER ROCKERS 1.65 3.625 LA. BILLET CRANK FRESH TITANIUM 6,200 RODS READY TO INSTALL. 20 ULTRA LITE PISTONS WISECO. HEADS I BOUGHT FROM GARY HARMON. RODS FROM CROWER CAMS. PISTONS NEW FROM WISECO CRANK SHAFT RUDBECK $1,500. BHJ BALANCER KIP ASPLUND. RODS $2,000 PISTONS 500.00 BALANCER 300 1.heads with rockers $3000 2.crank $1,500 3.rods 6.200 $2000 4.pistons $500 5.balancer $300.thanks.

 

[magee]

interested in the heads are they ported lmk thanks and how do you want to get paid..

 

[turbot990]

you have a pm.

 

[meanmachine]

kevin, ill take the bhj if it is neutral balanced.

 

[turbot990]

87 t type limited

guys the car is for sale as well with 30 over motor with forged pistons and a 210 hyd cam 350 turbo trans 9 inch coan with or with out XFI FAST unit THE 350 turbo has a trans brake the motor has a std std crank stock unit fresh 70 gtq frt mount intercooler alum rad.fiber glass bumpers alum core support with all this and more 70,000 mile limited no rust very solid notched rear frame QA1 REAR shocks anti roll bar 3 in stainless exhaust mini starter car comes with a laptop just plug and play 3 tunes to choose from areomotive fuel system alum pulleys mosier spool 390 gear racing drive shaft 33 spline axels

 

[turbot990]

GN1 HEADS and MORE IMFORMATION

interested in the heads are they ported lmk thanks and how do you want to get paid..

These heads are fresh out of the machine shop 3 angle valve job and a lite surface job there is a 109 20 over block with rjc girdle and oil pan.or a rotating assembely with crank rods and pistons solid roller cam there are many options block crank rods fresh out of the machine shop 1 new titanium rod was 600.00 dollars make me a offer im willing work with anyone on price,s LA. BILLET CRANK 3.625 10/10 GROUND ON THE HIGH SIDE every rod checks at 0.2000 clearance as well as block to crank with the correct line bore measurements 0.2000 SHORT BLOCK READY to build rings are filed to fit each cylinder thanks.motor is not built but can be if needed.

 

[turbot990]

The t type is for sale turn key or roller this car will 60ft mid 0r better 1.30,s with a mild motor i have a motor and tranmission for the car as well still comes with the fuel system but with a stock ecm and with 009 injectors 350 turbo 9 inch converter fresh motor and transmission pm me for any other imformation you need about the car turn key 12,000 rolling with transmission 10,000 ---- no rust any were lots of fiber glass parts