Hydroboost conversion no brake pedal

[1984 t-type]

So I just did a conversion over to hydro-boost. I bench bleed my Wilwood master cylinder, bled the power steering system, and bled the brakes but i get no pedal just drops to the floor with very little resistance. This was with the engine off, it was late and i have an attached garage so i couldn't start it up and check the pedal feel, what could i have did wrong or forgotten to do ?

 

[Chuck Leeper]

and bled the brakes but i get no pedal just drops to the floor with very little resistance

If that's the case, how did you bleed them?

 

[1984 t-type]

Using a vacuum bleeder from harbor freight. The one that runs off a compressor.

 

[Chuck Leeper]

Did you check the pin depth at the rear of the m/c?

 

[1984 t-type]

No. How would I go about doing that ?

 

[1984 t-type]

Rebleed the master and brakes working now.

 

[Chuck Leeper]

 

[rag231]

What hydro boost did you use?

 

[1984 t-type]

Reman unit for the 84-85 regal