Injector I.D. help

[1turbo6]

just picked up an 87 gn and am trying to figure a few things out, one is what injectors are in it the numbers on the side are( I think)
02 280 155 868
I'll try to attach a pic
the chip is a caspers that says bluetop performer but that has been colored out with a black marker. so I think it may have been reburned.

 

[UNDER-PRESSURE]

Those are the service replacement for the Blue top # 967 injectors. They are rated at 36 lb's at 39 psi & typically put out around 38 lbs at 43 psi. My blue tops flowed almost 40 lbs at 45 psi when tested. Great injectors IMO.

 

[1turbo6]

so I should set static pressure at 42?

 

[UNDER-PRESSURE]

so I should set static pressure at 42?

Most chips these days are programmed for 43 psi static & is usually a good place to start.

 

[fgordon]

Identification table for injectors

Try this link and ID your injectors by the part number that is usually marked on the barrel.

Stan Weiss' - Electronic Fuel Injector (EFI) Flow Data Table

With the number of questions on this board about identifying injectors maybe this link should be a "sticky"