Installing a Translator - What other changes (tuning/settings) need to made?

[TURBOPOWERED68]

Installing a Translator - What other changes (tuning/settings) need to made to make it work?
I will be using a Ls1 3.5 inch MAF and Translator.

They will be replacing the Stock MAF sensor
the car has a TT 5.7 Chip.

 

[Eric Stage I]

Open the Translator box, set the 4 little white switches to ON,ON,ON,OFF, set MAF BASE to 0, and WOT to 0.
That's it.
Monitor the BLM's over a few days. If they're a little low or high, use the MAF BASE to adjust.
Regards,
Eric

 

[SuperSix]

I think the Pro setup is different..

 

[TURBOPOWERED68]

cool

 

[blackdeathtrap]

eric if i have a street chip from you and a translator what added thing should be adjusted on your chip

 

[TurboDave]

I think the Pro setup is different..

The Pro wasn't mentioned.

 

[Eric Stage I]

eric if i have a street chip from you and a translator what added thing should be adjusted on your chip

Nothing needs to be adjusted on the chip.
Eric

 

[SuperSix]

The Pro wasn't mentioned.

He mentioned a Pro in another thread/message board..

 

[TURBOPOWERED68]

He mentioned a Pro in another thread/message board..

Not me
The pro is well above my budget