Installing new injectors and chip from Turbo tweak

[Frank Darcy]

Hey Guys, I am in the process of installing new injectors in my 85 GN. Before I do something stupid, is there anything I need to know before I try to pry out the fuel rail. I have the top of the motor stripped and I am ready to pull out the injectors. I have everything out of the way and the hold down bolts for the fuel rail are out.Thanks

 

[sy1322]

they should just pop off, the only thing holding them are the o-rings on the bottom and top, just replace them on the fuel rail, and line them up and push down and they usally slide in. or rub a little oil on the o-rings and push, and then bolt the fuel rail and you should be done.

 

[O SO LO]

they should just pop off, the only thing holding them are the o-rings on the bottom and top, just replace them on the fuel rail, and line them up and push down and they usally slide in. or rub a little oil on the o-rings and push, and then bolt the fuel rail and you should be done.

X 2... my thoughts exactly!

 

[Frank Darcy]

Thks guys, they popped right out. Thanks for the help.