KB/ATR headers...want to vent

[grocerygetter]

Leaking SOB's...I'm fed the hell up.
That is all.

 

[CHANCE]

ive got the kenny bells they dont leak one bit also do a seach the kenny bells are better than the ATRs the vbands and flang on the kenny bells are 100% better than ATR whats leaking on yours

 

[Rosewood T-Type]

I have ATR's no problem.Been on and off 3 times still no leaks. Where are they leaking?

 

[Cheeseburger]

KB headers were great....never leaked and lined up to the heads perfectly.
ATR's, well..... "we have never heard of that problem"

 

[V6 Beast]

KB headers were great....never leaked and lined up to the heads perfectly.
ATR's, well..... "we have never heard of that problem"

They never heard of them cracking either.

If they are leaking where they meet the head, try a pair of Felpro 1400 HP exhaust gaskets. They work.


Sully

 

[Rosewood T-Type]

I used Rtv high temp copper on my ATR's no problems

 

[grocerygetter]

I used the 1400s at the Head...that's not the issue. They leaked at the junction on the crossover like a siv...welded that solid and pretty sure that fixed THAT issue. But once you fix one leak the other small ones get worse. Now, I've got a leak again around the v-band clamp I replaced. I'm hoping that's it at least. If not it cracked the header again. Yes, again, the passenger side header was cracked and welded recently. The BLM's have steady risen from 135-145 as the leak has worsened..duh. So, I'm taking care of it.