Laser cut from 1/8" mild steel. Used to convert from power brakes to manual brakes.

[malibudave]

Laser cut from 1/8" mild steel. Used to convert from power brakes to manual brakes. For use with the stock manual master cylinder from a 1978 to 1988 GM midsize variants ( g-body ).

If you have any questions, shoot me an email or give me a call.

David Schultz
david.schultz@mail.com
832-264-5566

 

[TURBOTWIN2]

I don't need it but a price would probably help other people decide.

 

[malibudave]

Manual Brake Swap Adapter Plate $25 shipped to lower 48

That would probably help.

Manual Brake Swap Adapter Plate $25 shipped to lower 48

 

[78olds]

would the master cylinder be level thanks dave

 

[malibudave]

would the master cylinder be level thanks dave

No it will not be level. When you use a stock manual master cylinder designed for the gbody (found at any autoparts store), the angle will be the same as the power master cylinder.

Dave

 

[sackracing]

will it only work with a stock master cylinder?

 

[malibudave]

will it only work with a stock master cylinder?

It will work with any stock manual master cylinder for a g-body.

 

[sackracing]

I was gonna use a Strange large bore master cylinder

 

[malibudave]

Sold