Lock Up switch.

[getdowngranny]

Hey TB family, i need some help identifying the wires for the converter lock up. It will be wired to my ash tray switch panel. Any help will do. Thanks!

 

[northern87gn]

top right and top left on aldl connector

 

[getdowngranny]

How would i go about wiring it? One cable on each side of the switch?

 

[Just a Six??]

yes. Your just grounding the one wire. Forget which is which off hand but from the wire to switch to ground. Grounded is locked up altho if you have a TT chip its built in already.

 

[Topjimmy]

Grounded is locked up altho if you have a TT chip its built in already.

Eric @ TurboTweak does NOT set his street or alky chips for converter lock-up unless you request it.
Quote from the chip order page: "I do not set the torque converter to lock at WOT, as it typically causes too much knock and breakage.
If you still want it to lock at WOT, you have to specifically tell me."

 

[getdowngranny]

So wich wire is it? I dont want to ground out something im not supposed to.

 

[GNVenom]

Tan/Black wire to TCC
Black/White wire is a ground.

Top row of the ALDL, it's the far left terminal, and the far right terminal. Jumper those with a switch and you force the lockup. However, when you hit the brakes, it unlocks.

 

[XLR8]

Here is a pretty good write-up:
Switches