I cannot seem to find it again. I also don't know if it was on here or one one of the other boards. It is a thread about porting heads, and the guy had pictures of stock vs. ported heads and intake. I believe he did the porting himself. each picture compared stock and ported side by side.
Looking for thread
- Thread starter gergwheel
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
tminer
Not quite normal
- Joined
- May 25, 2001
- Messages
- 761
Hey Greg,
I've got a pair of pocket ported heads if you want to check them out. One has an example of what not to do from when I attempted to port the runners per the Power Source book templates. You can cut it up to your heart's content, I've got other things for paper weights.
BTW, the pocket porting was done by a professional.
Tom
3-1946
I've got a pair of pocket ported heads if you want to check them out. One has an example of what not to do from when I attempted to port the runners per the Power Source book templates. You can cut it up to your heart's content, I've got other things for paper weights.
BTW, the pocket porting was done by a professional.
Tom
3-1946
Thanks tom, i might stop by tonight and check those out. I also still have that chip to give back to you. ill call ya tonight after 5 if that works
Also potbelly, im looking for a thread on a messageboard, not a guide to do it. Thanks anyways though.
Also potbelly, im looking for a thread on a messageboard, not a guide to do it. Thanks anyways though.
