lots of parts

[malibuick231]

200r4 with a precision 3200 t/c, trans brake, and billet servo was built about 3000 miles ago $600
Stock crank needs to be turned 10/10 $200
Stock balancer $40
Stock flexplate $40
Main accessory bracket $50
J bracket for turbo $30
Turbo oil drain $40
Stock heads $50
Stearing box with resavor, lines, and pump $150
Shifter with new cable and new handle $100
All parts are for 86/87 car and are plus shipping.

 

[decarlo sloan]

do u have a detank bracket and tb linkage? for dog house need it asap

 

[wants a tr]

whats the story on the tranny? does it work?

 

[CTX-SLPR]

I'll take the main accesory bracket if its intact and you promise to pack it well, tell me where to send money. Also any issues with the tranny other than it is no longer needed by you?

Thanks,

 

[malibuick231]

Decarlo sloan I think I have the bracket and are you talking about the linkage on the side of the t/b if so I think I have that also.
wants a tr The trany is a 85 T type bo core with good parts in it.The trans was working fine when I pulled it out due to a blown engine.It has been sitting for about 10 months.
CTX-SLPR the bracket is in good shape no stripped holes.

 

[malibuick231]

I'll take the main accesory bracket if its intact and you promise to pack it well, tell me where to send money. Also any issues with the tranny other than it is no longer needed by you?

Thanks,

I can take care of the bracket for you.The trans worked fine when I took it out.It is a bo core out of a 85 t but I think they are as good as a bfr core.
You can send a money order to
Rusty Brooks
4217 Park Cir.
Helena Al 35080
If I can help with any thing else let me know.

 

[CTX-SLPR]

I can take care of the bracket for you.The trans worked fine when I took it out.It is a bo core out of a 85 t but I think they are as good as a bfr core.
You can send a money order to
Rusty Brooks
4217 Park Cir.
Helena Al 35080
If I can help with any thing else let me know.

Thanks, I have already bought one and had an ear crack off of it in shipping. Don't want to go through that again. Money will go out on Friday or Sat.

Thanks,

 

[wilegenius]

who rebuilt trans? What type transbrake? How much power putting through it? How fast were you going? Are you still in birmingham

 

[SFITurbo]

Whats the condition of the heads?

 

[malibuick231]

Just a stock set of heads.The car didnt smoke when I pulled the engine out.

 

[decarlo sloan]

parts

if you have them still give me a call at 216387 1958 shaun asap thank you

 

[1BADWE4T]

Will you sell the convertor separately? If so how much?