Lubrication for BB turbo

[2toneNV]

Ok guys, so I have a new PTE 6765 BB turbo and before I bought the oil/water line kit for it. I wanted to know if there is a different way to go (i.e. PTE turbo saver)?

 

[gergwheel]

14mm Banjo Fitting Set for coolant lines - 3/8" Barb: atpturbo.com

those are the fittings you need for the water lines on the turbo side, then just get some 3/8" fuel line and plumb it into your cooling system. Oil lines are a different story, i got a SS braided feed line and it screws right into the fitting on the turbo so that is all i had to do for that.

 

[2toneNV]

thanks for the info! what length hoses and what size on the SS braided line?

 

[gergwheel]

thanks for the info! what length hoses and what size on the SS braided line?

I went to autozone and got 3' of the 3/8" fuel line, figured that should be more than enough length to get me where i need to go with it. I will need some more fittings to go from the 3/8" line to the heater core lines, but i will just have to wait and see what i need there.

As for the SS line, i ended up getting a SS line from a gauge install kit and just used that. No idea what size the fittings or anything are for that. sorry