You can type here any text you want

Lucky I didn't wreck the GN this weekend

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

BriHorse

GO TIGERS!
Joined
Jan 19, 2006
Messages
113
While the car was sitting in storage over the winter, I added a 160 thermostat, a 3-inch chrome up pipe, one new hood strut, and a billet oil fill tube with a breather. Well the weather got warm enough to bring it out of storage on Saturday. I took it into town to get an alarm installed on it. Once I left there I decided to get into some boost. I put the throttle down but it felt like I wasn't getting the pedal to go down all the way. So I did what any normal guy (one who doesn't use his brain first) would do. I used force to get the gas pedal down to the floorboard. Well the pedal went to the floor and stayed there! No matter how much I kicked at the pedal, it wasn't coming back up! I was doing 40 mph in a 45 mph zone when I decided to do this too, not from a dead stop. I didn't look down at the speedo, but I was coming up on a car REAL FAST!:eek: I threw it in neutral and shut the ignition off. When I came to a stop and popped the hood open, I realized that when I installed the new t-bar clamps on my new up pipe I put one of them in the way of the throttle cable. Lucky I didn't learn my lesson in a really hard way, I escaped with only stained boxers as the only damage.:D
 
I've heard of that happening to other guys, must be pretty scary!

At least you knew how to safely shut it down.

Pete
 
Mount your clamps like this! No chance of them hanging up on the throttle bracket.
 

Attachments

  • clamps.JPG
    clamps.JPG
    72.7 KB · Views: 167
I would have probably crapped my pants....How high did it rev when you put it in N?

Jason
 
I don't know how many rpms I turned, but it wasn't for any amount of time because I knew I was going to shut it down before I threw it in neutral. I don't think it was for more than half a second. Thanks Mark for the idea on the clamps, they look pretty good that way.
 
Back
Top