MAF Translator, where does it connect?

[DARTHV6]

I have the Capsper engine harness and a MAF translator. I can’t find the 3 blade connector to connect the other end of the MAF translator. Anybody have any pictures where it is on a Capsper engine harness? That would help a lot.

Thanks
Art

 

[mblum]

Does your car currently have an OEM MAF Sensor?

If so it will plug into that same weather pack that is plugged into your OEM MAF sensor.

 

[DARTHV6]

Does your car currently have an OEM MAF Sensor?

If so it will plug into that same weather pack that is plugged into your OEM MAF sensor.

No, this is a fabrication build with no existing wires. Just that engine harness.

 

[mblum]

If the Casper's engine harness was a stock replacement intended to use the stock ECU, it has to have a MAF plug on it somewhere. If someone was running speed density or an aftermarket ECU and had a custom harness made, maybe it doesn't have the plug. If it's a stock replacement harness, it has the plug somewhere.

 

[DARTHV6]

If the Casper's engine harness was a stock replacement intended to use the stock ECU, it has to have a MAF plug on it somewhere. If someone was running speed density or an aftermarket ECU and had a custom harness made, maybe it doesn't have the plug. If it's a stock replacement harness, it has the plug somewhere.

It is for the stock replacement. I just can’t find it. The harness is already installed. Hoping someone had a picture to help me identify it.
Thanks,
Art

 

['87 Turbo "T"]

Not sure with the Casper’s set-up but stock MAF wiring should be around DS front fender.

Would think Casper’s is the same unless it was made a certain way. Can always give Justin a call & see if he has any info.

 

[pacecarta]

if it was built as stock replacement ( not mafless custom) it should have been taped along with the fan wiring
(note the stock harness does not include the fan delay relay connectors because he like many others just remove them anyway due to failures )
in bottom right corner of pic you can see the maf /fan connectors

if its not there and this is a new harness install , call casperselectronics

 

[pacecarta]

heres the instructs sheet from caspers that shows the maf connector

https://www.installationinstructions.com/109030_production-2025.pdf