Master Cylinder

[Nelson Ramos]

Can anyone tell me what it can be, th he master cylinder worked perfectly but for some reason it Keeps on popping fuses?

Posted from the TurboBuick.Com mobile app

 

[Regan J 1]

Look at the sticky at the top of this section. It is powermaster diagnostics.

 

[TexasT]

If it is popping fuses it isn't working perfectly.
X2 on the sticky.

Posted from the TurboBuick.Com mobile app

 

[forcefed3.8's]

Most likely it needs a Powermaster pump.

 

[TurboDave]

Most likely it needs a Powermaster pump.

Not always true. Had a switch go bad on mine, causing excessive motor running, which took out the fuse after a mile or so of driving. But.. If the fuse is blowing as soon as the key is turned on, then it's likely something different.

Sent from my QMV7A tablet via Tapatalk.

 

[Nelson Ramos]

It works for about 10 minutes than pops. I replaced the switch still the same. It's probably the pump. Just ordered a hydrobost system. Thanks guys

Posted from the TurboBuick.Com mobile app