ME 16 and LS1 MAF

[Hawaiian Turbo]

I was wondering if the two will work? I did a search, but nada's.

Thanks

 

[tminer]

You will need a Translator, which will make the LS1 MAF appear as a stock MAF to the ECM. That will give you a more accurate and durable MAF, but it will not extend the range past 255 grams/sec.

As far as I know, the only commercially available chip to utilize the 512 gram/sec capability of the LT1/LS1/LS6 MAFs is the Extender. There is a MAFless version of the ME though. Either option has it's proponents, but bottom line is that it's all good.

HTH,
Tom

 

[Hawaiian Turbo]

Thanks Tom, I'm sorry, I forgot to mention that I have the Trans + with an extender chip. Thanks again. Paul

 

[c&cgn]

Originally posted by Hawaiian Turbo
Thanks Tom, I'm sorry, I forgot to mention that I have the Trans + with an extender chip. Thanks again. Paul

Run whatcha got Paul You already have one of the best chips out there. Make sure it is upgraded to the Extreme version and Revision F and you will be laughing.

Clayton

 

[salvageV6]

Yes they work together. Use the ME16 with the 43 bosch injectors for 5 years in my car.

Upgraded to 55's and now I use the Extreme Extender or is that Extender Extreme.

Use the BSTC for wastegate control if you are still using stock actuator system with the ME chip.

 

[Hawaiian Turbo]

Howzit Clayton, I like that set-up I'm running. Tunablity is great! I was just thinking later down the road, seeing what to keep and what to get rid of. I'll be using my BSTC with the ME also.