You can type here any text you want

Muffler I.D. & Search

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

BFlat

Member
Joined
Dec 2, 2023
Messages
102
’87 Ltd. Drone is too much & wanted Magnaflows. Don't want to replace the whole system.. Nothing would fit without re-doing pipes. What are these GMs mufflers that are on the car now, and any ideas what to replace them with that will fit? Mufflers are straight through & small. 3 3/4” high, 8” wide, 12” long.
 

Attachments

  • pipes 1.jpg
    pipes 1.jpg
    162.6 KB · Views: 13
  • pipes 2.jpg
    pipes 2.jpg
    247 KB · Views: 13
  • pipes 3.jpg
    pipes 3.jpg
    387.6 KB · Views: 13
Here is some good information.


Magnaflow makes a center in/ center out muffler that’s 5”x 8” but is 14” long.
The corner could be cut off and a plate welded on to make it fit.
Maybe trimming the tailpipe and the inlet/ outlet pipe would help.
I’m assuming the pipes are 2 1/4”.


Vibrant makes some ultra quiet resonators that may work as well.
This one is 4 3/4”x 6 1/2”x 9 3/4” long.
A pipe will have to be added to the front side for length, and move the resonator to the back. It might clear without cutting the corner off.
One of the guys ran these, but thought it was too quiet.

 
Back
Top