Need a right angle fuel rail shrader valve adapter...

[FJM568]

Anyone know where to get a right angle shrader valve adapter??? I need to have my shrader valve pointed in a different direction than what it is stock(straight up on the 84/5s)...Short of changing out the fuel rail to an 86/7 rail w/valve pointed forward, which would be a real PITA to change on the 84/5 motors with the turbo on top of the motor(would have to pull the turbo,etc to do it), does anyone have any ideas???

 

[XLR8]

Postons sells a "T" that fits on the end of the fuel rail. After install, one shrader opening will go straigt and the other at a 90* angle.

 

[NASSTY]

Kirbans also sells the same one.Part#6868 Fuel Line Tap Access Valve $16.The valve extends about 3" beyond the end of the fuel rail when in place and you can cap off either end .
Kirbans 215-766-1611 The online catalog doesnt show a good picture of it so dont bother looking.Good Luck.....
Mike

 

[Jimn8or]

OTC p/n 7340 or 7346, I can't remember which. It's the only 90° fitting in their 2002 catalog. Not cheap, but second to none.
HTH
Jim