Need Ext Wastegate

[sick GN]

Bought an ATR 3" DP with the ATR WG and it seems the WG may be bad... Lookin for a direct replacement... Not sure exectly which ones fit but i think i saw some with deltagates... let me know what you have

thanks
jeremy

 

[Sweet6]

get a tial 38MM bolts right in.

 

[sick GN]

hopin to find someone with a used one... just spent the money for this setup because it claimed it was good... i think the diaphragm is bad...

 

[David Husek]

Bought an ATR 3" DP with the ATR WG and it seems the WG may be bad... Lookin for a direct replacement... Not sure exectly which ones fit but i think i saw some with deltagates... let me know what you have

thanks
jeremy

Kirban sells the rebuild kit for the ATR wastegate.

 

[sick GN]

thanks just looked up the kit and am now wondering what exactly are the symptoms associated with needing this kit??? Would not getting over 10lbs of boost no matter what was capped or plugged make any sense??

 

[Sweet6]

The WG is probably fine. When the ATR goes bad the valve seizes and you have no boost control. You you using the top andd bottom port of the WG?

 

[sick GN]

yes the bottom is now connected straight to the compressor side of the turbo.. i eliminated the boost controller for now... I then screwed the screw in on top of the WG all the way and also capped the vent up top with no changes to boost whatsoever... very aggravating!! what else could cause this??

 

[lrayzer]

yes the bottom is now connected straight to the compressor side of the turbo.. i eliminated the boost controller for now... I then screwed the screw in on top of the WG all the way and also capped the vent up top with no changes to boost whatsoever... very aggravating!! what else could cause this??

What happened with this issue ?
Get it resolved ?

 

[278cikiller]

Bought an ATR 3" DP with the ATR WG and it seems the WG may be bad... Lookin for a direct replacement... Not sure exectly which ones fit but i think i saw some with deltagates... let me know what you have

thanks
jeremy

Jeremy I have a real nice Billet Innovative WG works great, came off a ATR DP. Let me know thanks.

 

[trixdout]

hopin to find someone with a used one... just spent the money for this setup because it claimed it was good... i think the diaphragm is bad...

I got a 38 mm ext wastegate I'm trying to sell. Was used for 6 months. It looks like the same 46mm ext wastegate currently being sold on the downpipes at buickgn.com.

 

[highboostgn]

what kind of srping do you have in there?

 

[trixdout]

i believe its 13lb spring. Its a blue spring. Idk it might be 35mm. I gotta measure it to be exact.