Need gaskets, valley pan

[EVIL]

I've been searching on line and even a few of our vendors and i can't seem to fine everything I need.

I'd like to purchase a new valley pan for the intake and front cover gasket. All from one place would be ideal.

Thanks
D

I also need a set of COMETICS. .040 or bigger.

 

[earlbrown]

timing cover is felpro TCS45930

Intake is MS96037 if you don't use EGR and MS96033 if you use EGR.

Any fast food parts house should have them.

 

[EVIL]

Thank you sir.
Isn't there also some goop that goes around the water ports?
I can't remember if I used The Right Stuff or something else.

D

 

[nonosv6]

Yes I do believe I used the right stuff on front back and water ports myself. I think I got my valley pan gasket from jegs cuz it was cheaper . But in all honesty the thing was a pain in the ass to get on right. Might consider just using the reg felpro ones. Just my experience. Joel

 

[nonosv6]

Is your car gonna be out this year? Hoping mine will be done well driving soon. Lol. Putting a th400 in it for now but don't know if ill be putting the stage motor in this summer or not.

 

[earlbrown]

Thank you sir.
Isn't there also some goop that goes around the water ports?
I can't remember if I used The Right Stuff or something else.

D

The valley pan gasket comes with a small tube of black RTV.

 

[EVIL]

The valley pan gasket comes with a small tube of black RTV.

Thank you.

Is your car gonna be out this year?

I'm trying : ) I have lost some of the fire I had for this car ever since the second engine failure last september though. This is my last attempt before i strip her down to nothing. And I'm not even trying too hard putting it together this time. I know, it's sad but thats life.

D

 

[nonosv6]

Thank you.

I'm trying : ) I have lost some of the fire I had for this car ever since the second engine failure last september though. This is my last attempt before i strip her down to nothing. And I'm not even trying too hard putting it together this time. I know, it's sad but thats life.

D

Man I hear ya. We all been there. After I spent 4 solid months putting my car together I got burned out with it. Then my i fried my 200 with barely 50 miles on the setup. Car sat for a good year and a half. Now I'm getting that bug again and I just bought a th400 and a 9" and have decided to change a bunch of crap lol. Bigger breaks manual master removed heat ac . Really want to put the other motor in but I'm just gonna see what I can do with what's in it for know. Hit me up sometime if u need a hand or anything I'm not to far away. Joel

 

[EVIL]

Thanks Joel. If you could come down and put the rest of this motor together, slap it in the car and button everything up I'd really appreciate it!

D