Need Help. PL and fuel psi configuring

[KEVINS]

I've searched and nothing that has been posted tells me anything useful.
I have Razors fuel XDCR and wiring harness installed so there is only one wire to connect.

Wire from harness connected to I4 at PL block but I don't get any reading..

What am I supposed to do with PL to read fuel psi?

The .ini file doesn't look like anything that anyone else has posted so how do I configure PL for the 0-145psi?


[Comm]
AutoPort=1
Port=2
GraphSkip=0
FrameRate=20
[Graphs]
Graph1Channel=3
Graph2Channel=17
Graph3Channel=5
Graph4Channel=13
[Data]
MAFRangeIndex=0
Barometer=98.3186264038086
VehicleSpeedScale=1
ECMReferenceVoltage=4.94999980926514
AFRChartMax=16
AFRChartMin=10
[AnalogChannels]
Analog1=0
Analog2=0
Analog3=0
Analog4=3
Analog5=0
Analog1Filt=0
Analog2Filt=0
Analog3Filt=0
Analog4Filt=0
Analog5Filt=0
Analog1OffsetVolts=0
Analog2OffsetVolts=0
Analog3OffsetVolts=0
Analog4OffsetVolts=0
Analog5OffsetVolts=0
[DisplayConfig]
AnalogSpark=0
[Custom]
LV8CoolantGauge=0
[ScanmasterConfig]
DisplayWB=0
DisplayMAP=0
DisplayBoost=0
DisplayEGT=0
DisplayAutoBaro=1
[Triggers]
TPS=3
KNR=10
MinRecordingSec=10
TPS_TrigEnabled=0
KNR_TrigEnabled=0
NewDTC_TrigEnabled=0
[QuickSave]
DefaultFilename=QuickSave
DefaultComment=Quick Save File
FileSerialNumber=4
AutosaveAfterRecording=1
[ConverterSlip]
RatioLowGear=0
RatioMidGear=0
RatioHighGear=0
[Warnings]
KnockWarningThreshold=0
RPMWarningThreshold=5500

ks

 

[KEVINS]

Discovered that the new PL that was shipped wasn't the latest version..

aarrgg..

ks

 

[Sweet6]

That is normal. Lol

Posted from the TurboBuick.Com mobile app