turbowannabe
Member
- Joined
- Dec 6, 2001
- Messages
- 377
New never run champion cnc ported iron heads with new PAC 1201x roller valve springs installed. I believe I bought the valve spring kit from full throttle in Michigan and they were around $400 at the time
Located just outside of Peoria Illinois. I can ship but they're heavy and I always insure high dollar items like this. I sell a lot of buick parts on the buick Facebook groups. My name is Dan Smith from Hanna City Illinois if you want to look me up. Plenty of people will vouch for me there. My phone number is 309-339-2142 if you would like to speak with me over the phone.
$2600 is what I'm looking to get out of the heads. Looks like they currently going for that price with standard flat tappet springs Installed. I typically have the buyer pay for shipping and PayPal fees if they're paying goods and services. Ideally I would like these to be picked up and willing to drive a little ways to meet the buyer in person. If these need to be shipped we can discuss options on that since they are heavy and with that amount of insurance it may get pricy along with PayPal fees
These heads and springs are new and have never been run. The were assembled then removed. Long story short, I wasn't happy the build quality of the lower end of the motor with the builder I used. I've got an opportunity to buy a friend of mines proven bolt in and run stroker motor that already has the same heads installed so I cut my losses and have been parting out the build these heads came off to pay for the motor I'm buying.
Apparently t's a common issue that these heads can come new out of the box from champion with sub part valve work. I had my local machine shop go through then and address any issues. They found the intake valves measured good and dye test measured proper sealing/contact so they were left alone.
Exhaust seats were a little out of spec so they did some minor work to them then put all new valve seals in. Heads were then vacuum tested to very proper seating. This shop is known to be the best around. Automotive machine in Pekin Illinois. They were recommended by another local hot rod guy. Receipt for the work performed is in the pictures.
Also wanted to clarify the shop who did the head work was the not one who did the previous work that prompted me to part the engine out. Feel free to contact me with any questions.
Located just outside of Peoria Illinois. I can ship but they're heavy and I always insure high dollar items like this. I sell a lot of buick parts on the buick Facebook groups. My name is Dan Smith from Hanna City Illinois if you want to look me up. Plenty of people will vouch for me there. My phone number is 309-339-2142 if you would like to speak with me over the phone.
$2600 is what I'm looking to get out of the heads. Looks like they currently going for that price with standard flat tappet springs Installed. I typically have the buyer pay for shipping and PayPal fees if they're paying goods and services. Ideally I would like these to be picked up and willing to drive a little ways to meet the buyer in person. If these need to be shipped we can discuss options on that since they are heavy and with that amount of insurance it may get pricy along with PayPal fees
These heads and springs are new and have never been run. The were assembled then removed. Long story short, I wasn't happy the build quality of the lower end of the motor with the builder I used. I've got an opportunity to buy a friend of mines proven bolt in and run stroker motor that already has the same heads installed so I cut my losses and have been parting out the build these heads came off to pay for the motor I'm buying.
Apparently t's a common issue that these heads can come new out of the box from champion with sub part valve work. I had my local machine shop go through then and address any issues. They found the intake valves measured good and dye test measured proper sealing/contact so they were left alone.
Exhaust seats were a little out of spec so they did some minor work to them then put all new valve seals in. Heads were then vacuum tested to very proper seating. This shop is known to be the best around. Automotive machine in Pekin Illinois. They were recommended by another local hot rod guy. Receipt for the work performed is in the pictures.
Also wanted to clarify the shop who did the head work was the not one who did the previous work that prompted me to part the engine out. Feel free to contact me with any questions.
Attachments
-
PXL_20250827_231255104.jpg1.5 MB · Views: 1
-
PXL_20250827_231302403.jpg1.2 MB · Views: 1
-
PXL_20250814_215010969.jpg1.6 MB · Views: 1
-
PXL_20250814_214938606.jpg1.5 MB · Views: 1
-
PXL_20250814_214935895.jpg1.6 MB · Views: 1
-
PXL_20250814_214935895.jpg1.6 MB · Views: 1
-
PXL_20250814_214929888.jpg1.7 MB · Views: 1
-
PXL_20250814_214927404.jpg1.5 MB · Views: 1
-
PXL_20250814_211133611.jpg964.3 KB · Views: 1