You can type here any text you want

New LC-1 & FP logging Install Review

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
Joined
Oct 6, 2003
Messages
148
Hi Guys,

I wanted to post some PL files. Just want to make sure things look OK. Car Felt pretty good.
69K 86 GN All Stock Turbo, Motor, Trans, & Converter. Dutt neck IC. 5.7 TT Alky chip, Razor Alky 6.5 Gain setting, 255/60-15 Street tires.
There is a lot of Wheel spin. I have to ease into the throttle till it hooks on all runs. Temp 65 Degs & clear. Please let me know if anything seems out
of whack.

Thanks, Mike
 

Attachments

Voltage is dropping as low as 12.3 at wot. I had this same problem. Might think about a volt booster. IDC is low (not a bad thing), you must have some big injectors or could be that the alky is at 6.5. I keep mine at 6.
 
Voltage is dropping as low as 12.3 at wot. I had this same problem. Might think about a volt booster. IDC is low (not a bad thing), you must have some big injectors or could be that the alky is at 6.5. I keep mine at 6.

I did see the volts dropping. I may need to Hot wire my Alky pump. The volts drop only when the Alky pump is running.
The Alky pump is fed off 1 of the Ign. Slots in the fuse box. I need to put a volt meter on the battery then the Alternator
while I get on it, To See where I am losing the volts.

Thanks, Mike
 
Back
Top