New Ported & Polished w/big valves & new springs $700

[BM Computer Src]

I have a set of GN 8445 castings which have been ported, polished and given the competition valve job from precision motorsports. They have the big valves, stainless 1.77" / 1.50" and new comp cam springs (90 lbs seat pressure). New seals, retainers, etc... They have a fresh decking and are truly flat and ready to bolt up, they have not yet been run at all. These flow 200+ CFM and the flowsheet will be included. A similar set I had done for my TTA put me 10 psi lower than I had to run to get the same ET and trap speed, so I had a ton more potential because of the opening up of these ports. They normally sell for $900 plus shipping. I'll sell these for $700 plus $20 shipping.

Please PM me or email bob@bmcomputersource.com if you are interested. They can ship immeadeately.

Pics available.

Bob

 

[19TTA89]

I have a set of GN 8445 castings which have been ported, polished and given the competition valve job from precision motorsports. They have the big valves, stainless 1.77" / 1.50" and new comp cam springs (90 lbs seat pressure). New seals, retainers, etc... They have a fresh decking and are truly flat and ready to bolt up, they have not yet been run at all. These flow 200+ CFM and the flowsheet will be included. A similar set I had done for my TTA put me 10 psi lower than I had to run to get the same ET and trap speed, so I had a ton more potential because of the opening up of these ports. They normally sell for $900 plus shipping. I'll sell these for $700 plus $20 shipping.

Please PM me or email bob@bmcomputersource.com if you are interested. They can ship immeadeately.

Pics available.

Bob

Please put me first in line pending some pictures...

Thanks,Shawn

Also e-mailing..

 

[Super6]

heads

i went 122 and some change with these heads and a te44...they perform great and that is an awesome deal. Bob

 

[shawnz]

Can you send me pics and second in line thanks

 

[BM Computer Src]

Hi Guys,

I'll send pics over to those who asked. Thanks for the compliment too, Bob!

Thanks!
Bob

 

[Ed Valvo]

Pics please. Send to: mario1984@aol.com

 

[shawnz]

Can you send some pics to shawnz@shaw.ca thanks

 

[BM Computer Src]

All emails and pics sent, except to 19TTA89, I need your email address please!
PM it or just send to bob@bmcomputersource.com

Thanks.
Bob

 

[19TTA89]

All emails and pics sent, except to 19TTA89, I need your email address please!
PM it or just send to bob@bmcomputersource.com

Thanks.
Bob

ShawnFarrell313@Comcast.net

If you left click on a persons user name it has a a little drop down menu...you can usually grab a persons e-mail from there if they have listed it.

(Just for Future reference)....

 

[BM Computer Src]

Please put me first in line pending some pictures...

Thanks,Shawn

Also e-mailing..

Shawn backed out, so I'm going down the line to the next Shawn...

Bob

 

[turbojustin]

Put me in line and please send pics to justinhatten@hotmail.com

 

[gergwheel]

pics to gwheelan@kent.edu please also put me in line if you still have them

 

[GNJoe86]

Pic's to JoeSS81@aol.com
thanks

 

[Dr.drivability]

The heads still available.

 

[Dreamcar86]

Are the heads still for sale? If so can you send pics?

wsclarke@ikon.com

Thanks

 

[Drewster]

Sent PM

Sent PM

 

[1fastgn86]

Are these heads still available?

 

[85 conversion]

heads still for sale???

 

[Super6]

heads

Bob, if you still have them i have a buddy that wants them. i sent you an email..........thanks Bob