Been fighting the car not wanting to start or stay running. So thought id put the 86/87 conversion ignition module in along with a new crank sensor. Did the necessary wiring getting 12v to that wire that is needed to be put in when doing the conversion. Had a buddy use a oms meter, he said we were getting readings we should be getting from the crank sensor and the cam sensor. But getting no spark.
Reached out to gbody parts to see if i could send back the ignition control module to be tested or maybe try another one. The responded quickly saying they were waiting to hear back from their tech on next steps, i reached out once more after a week passed and now its been 2 weeks passed.
I opened up the ignition control module and tested the wires and they are reading as its getting 12v.
Any suggestions or know of a tech in North Dakota by chance that could look at this. Beyond over my head and just want the car to run and be able to drive.
Thank you!
Reached out to gbody parts to see if i could send back the ignition control module to be tested or maybe try another one. The responded quickly saying they were waiting to hear back from their tech on next steps, i reached out once more after a week passed and now its been 2 weeks passed.
I opened up the ignition control module and tested the wires and they are reading as its getting 12v.
Any suggestions or know of a tech in North Dakota by chance that could look at this. Beyond over my head and just want the car to run and be able to drive.
Thank you!
